Amana Appliance Repair 

For more than 80 years, Amana company has been committed to producing appliances that deliver effectively yet costs less. 

Since 1934, the brand has been looked upon by millions of people as a top brand that provides cost-effective, easy to use, and quality products. Amana puts its customers’ needs first by creating purposeful innovations to help people live without any hassle and keep the home running smoothly. 

However, even the most quality appliance requires occasional repair, and Amana is not exempted. So, what do you do when your eco-friendly Amana appliance is on the fritz? Well, simply trust the experts at My Appliance Repair Houston to take care of all your Amana Appliance Repair! 

Amana Appliance Repair Services 

My Appliance Repair Houston knows the importance of keeping your Amana kitchen and laundry appliances maintained and ready to use at all times. So, the team at My Appliance Repair Houston provides a correct and efficient Amana appliance repair whenever you need it. 

Below is a list of the Amana appliance repair services we offer;

  • Amana refrigerator repair
  • Amana dryer repair
  • Amana dishwasher repair 
  • Amana freezer repair 
  • Amana microwave repair 
  • Amana washer repair 
  • Amana ice maker repair
  • Amana oven repair 
  • Amana stove repair 
  • Amana range repair (gas and electric)

Please note that any Amana appliance not listed here can also be repaired. 

You Can Rely on My Appliance Repair Houston for All Your Amana Appliance Repair! 

No matter the faulty Amana appliance, our experts will diagnose the problem, carefully explain the problem to you, and get the problem fixed in no time at all. We take pride and stand behind our repairs and the parts we use, so you can trust our experts to get the job done accurately and efficiently. 

Our technicians are well versed with Amana appliance units and can repair any faulty parts to extend the lifespan of your appliance. We understand that issues with appliances occur when you least expect them. So, we offer same day Amana appliance repair services in Houston, and our expert technicians can assess your Amana appliance in a thorough and timely manner. 

Amana Appliance Parts

In need of parts for your Amana appliance repair? Leave it to the experts at My Appliance Repair Houston! One amazing benefit of working with us is the full service we offer. Our technicians will detect the part that needs to be replaced in your Amana appliance, and then source for it from a trusted dealer, and immediately install it for you. 

Amana Appliance Repair Service in Houston

Keeping your Amana appliances regularly serviced and repairing them as soon as they breakdown can improve their longevity and performance. 

To ensure that your Amana appliances remain safe and efficient, trust My Appliance Repair Houston with your next Amana appliance repair. 

For a fast, courteous, and full-service treatment, call My Appliance Repair Houston on (844) 385-5513 or schedule an appointment on https://www.myappliancerepairhouston.com/schedule-your-service/

Our customer care representative team is available attend to you and we look forward to hearing from you. 

 

Amana refrigerator problems

Amana Refrigerator not cooling 
The condenser coils are usually located under the refrigerator. They dissipate heat as refrigerant passes through them. If the condenser coils are dirty, they won’t dissipate the heat effectively. As debris builds up on the coils, the refrigerator becomes less efficient, causing the refrigerator to work harder to cool down. If the coils are significantly dirty, the refrigerator will not be able to maintain the proper temperature. Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them.

Amana Refrigerator water dispenser not working 
To determine if the water supply tube is frozen, disconnect the tube at the bottom of the door and blow air through it. If air does not pass through, this indicates that the water supply tube is frozen. If the water supply tube is frozen, thaw it out. In addition, ensure that the freezer is kept at the proper temperature. The freezer temperature should be kept from 0-10 degrees Fahrenheit. If the freezer is too cold, the water line may freeze.

Amana Refrigerator ice maker not working 
If the freezer temperature is above 10 degrees Fahrenheit (-12C), the ice maker will not produce ice cubes efficiently. The freezer temperature should be set between 0 and 5 degrees Fahrenheit (-18 to -15C) for the ice maker to work properly. If the freezer temperature is too high, ensure that the condenser coils are clear of debris and the condenser fan is working properly. In addition, check to see if frost has accumulated on the evaporator coils. If the evaporator coils are frosted over, part of the defrost system has likely failed.

Amana Refrigerator ice dispenser not working 
The dispenser control board governs most of the functions of the dispenser system. If the control board is faulty, it may stop supplying power to the entire dispenser system. If only one dispenser part is not working, test each of the dispenser components before testing the control board. It is more likely that a single part has failed. If the entire dispenser system is not working, the control board is more likely to be at fault.

Amana Refrigerator not defrosting 
The defrost control board determines how often to run the defrost cycle. If the board fails, the refrigerator will not go into the defrost cycle. Before replacing the defrost control board, first test the defrost heater and defrost thermostat. If the defrost heater and defrost thermostat are working properly, the defrost control board is likely defective.

Amana Refrigerator is noisy or loud 
If the refrigerator is noisy or loud, especially when one of the doors are opened, either the evaporator or condenser fan blade may be at fault. First, check out the evaporator fan blade in the freezer behind the back panel. Try turning it by hand. If the fan blade does not turn freely, check to see if the blade is rubbing against something or if something is caught in the blade. Additionally, check the condenser fan blade in the back underside of the refrigerator to determine if it has any obstructions.

Amana dryer problems

Amana Dryer won’t start 
The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good. If overheated the fuse will have no continuity meaning the electrical path is broken and the fuse has blown. A multimeter can be used to test it for continuity. Be aware that a blown thermal fuse is an indication of a restricted exhaust vent from the dryer to the outside. Always check the dryer venting when replacing a blown thermal fuse.

Amana Dryer stopped spinning 
The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. Over time, the belt can break from normal use. If the belt is broken, the dryer won’t turn. To quickly determine if the belt is broken, reach into the dryer and turn the drum by hand. If the drum spins very easily, the belt is likely broken. Next, inspect the belt to confirm that it is broken. If the belt is broken, replace it.

Amana Dryer drum not turning 
The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. Over time, the belt can break from normal use. If the belt is broken, the dryer won’t turn. To quickly determine if the belt is broken, reach into the dryer and turn the drum by hand. If the drum spins very easily, the belt is likely broken. Next, inspect the belt to confirm that it is broken. If the belt is broken, replace it.

Amana Dryer takes too long 
If the vent is clogged or partially clogged, it will restrict the airflow through the dryer, substantially increasing the drying time. To ensure proper dryer performance, you should clean your dryer’s venting system at least once per year.

Amana Dryer overheating 
The heating element warms the air before the air enters the dryer drum. If the element is partially shorted out, it may produce heat continuously, even if the dryer has reached the proper temperature. When this happens, the dryer gets too hot. To determine if the heating element is at fault, use a multimeter to test each terminal for continuity to the case. If the heating element has continuity to the case, it is shorted out. If the heating element is shorted out, replace it.

Amana Dryer won’t stop 
If the vent is clogged or partially clogged, it will restrict the airflow through the dryer, substantially increasing the drying time. To ensure proper dryer performance, you should clean your dryer’s venting system at least once per year.

Amana dishwasher problems

First things first, is the door completely shut, the latch secure? What about Delay Start, has it been activated? If these issues aren’t the problem, here are some more things to check.

Start/resume light is flashing 
This could mean the door wasn’t closed within 3 seconds of pressing Start/Resume. Open the door and close it again before pressing Start/Resume. This light could also mean the cycle was interrupted. To resume, make sure the door is closed and then press Start/Resume.

Power supply 
If the dishwasher has a plug-in power cord, make sure it’s properly plugged in. If it’s direct wired, ensure the wiring is correctly connected. See more information on direct wire connections here. Then check to see if your household electrical box, fuses, and/or circuit breaker are in working order.

Water supply 
Is your dishwasher getting hot water? Ensure the hot water supply is on and the valve leading to the dishwasher is open.

Amana microwave problems

Amana Microwave not heating 
The diode converts the A/C power output of the transformer to D/C, doubling the voltage to nearly 5,000 volts. This high voltage powers the magnetron to heat the food. If the diode burns out, the magnetron won’t receive enough voltage to operate, preventing the microwave from heating. When the diode fails, it is often visibly burned out. Inspect the diode and if the diode is burned out, replace it. If inspecting the diode proves inconclusive, test it with a multimeter that uses a 9-volt battery or put a 9-volt battery in series with the diode. When the leads are reversed, the diode should only have continuity in one direction. (Warning: The microwave oven can store a lethal amount of electricity in its high voltage capacitor, even after the microwave oven has been unplugged. Due to the high running voltage and the potential for electric shock, it is extremely dangerous to replace the electronic components in a microwave. Only a licensed technician should replace the diode.)

Amana Microwave not working 
If too much current passes through the microwave circuitry, the line fuse will blow. If the line fuse blows, the microwave won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. If you don’t resolve the underlying issue, the new fuse will blow too. (Caution: The microwave oven can store thousands of volts of electricity in its high voltage capacitor, even after the microwave oven has been unplugged. Due to the potential for electric shock, it is extremely dangerous to replace the electronic components in a microwave. Only a licensed technician should replace the line fuse.)

Amana Microwave light bulb not working 
The light bulb itself might be burned out. Replace the light bulb before replacing any of the parts associated with the light bulb

Amana Microwave shuts off after a few seconds
A door switch might be failing intermittently. Check each of the door switches for signs of overheating, arcing, or burning. If you don’t see any obvious signs of failure, use a multimeter to test each switch for continuity. If any of the switches is visibly damaged or only has intermittent continuity, replace it.

Amana Microwave turntable not turning 
Use a multimeter to test the motor for continuity. If the turntable motor does not have continuity, replace it.

Amana Microwave buttons not working 
To determine if the touchpad is defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad.

Amana washer problems

Amana Washer won’t spin 
The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.

Amana Washer is making loud noise 
The tub bearing is mounted in the middle of the outer tub. The tub bearing helps to keep the inner tub spinning smoothly. Replacing the tub bearing is a very involved repair and will require disassembling most of the washer. If the tub bearing is defective, we recommend replacing both the outer tub and bearing.

Amana Washer won’t agitate 
If the washer won’t agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.

Amana Washer won’t drain 
Sometimes, small objects or articles of clothing can get caught in the drain pump. To determine if anything is blocking the drain pump, remove the drain pump and check the pump for obstructions. If the drain pump is clear of obstructions, but is still noisy during the drain cycle, replace the drain pump.

Amana Washer vibrating or shaking 
One or more of the shock absorbers might be broken or worn out. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake. Sometimes, when a washer is moved to another location, the shock absorbers can separate. Check the shock absorbers to ensure that they are positioned correctly, and inspect them for damage and wear. If one or more of the shock absorbers are broken or worn out, we recommend replacing all of the shock absorbers as a preventative measure.

Amana Washer fills slowly or will not fill at all 
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.

Amana range problems

Amana Oven not heating 
The igniter is the most commonly defective part for an oven not heating. The igniter has two main functions. First, the igniter draws electrical current through the oven safety valve to open it. Second, the igniter gets hot enough to glow and ignite the gas in the oven burner. If the igniter gets weak, it will fail to open the safety valve correctly. If the valve does not open, the oven will not heat. To determine if the igniter is defective, observe the igniter when the oven is on. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. If the igniter is weak, replace it. If the igniter does not glow at all, use a multimeter to test the igniter for continuity. If the igniter does not have continuity, replace it.

Amana Oven doesn’t bake evenly
If the bake element is burned out, the oven will only be heated by the broil element. This will cause the oven to heat unevenly. When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Amana Oven broiler not working 
The broiler element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.

Amana Stove heating element not working 
The surface element board has relays that regulate the power supply to the burners. If one or more of the relays fails, the surface element won’t work. If two or more burners fail at the same time, this indicates that the surface element board is likely at fault. If only one surface element won’t work, use a multimeter to test the element for continuity. If the surface element has continuity, the surface element board might be defective.

Amana Stove burner won’t light 
The spark modules provides power to each surface burner spark electrode. If the burner is produces a weak spark, or if the burner sparks intermittently, the spark module might be defective. Before replacing the spark module, first check the spark electrode and the spark wire. If the spark electrode and spark wire are not at fault, the spark module is likely defective. If the spark module is defective, replace it.

Amana Oven temperature not accurate
When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Amana range error codes

CODE: Door flashing #0, 1, 2, 3
PROBLEM: Broken latch switch
FIX: Recommended to replace latch switch

CODE: Lock flashing
PROBLEM: Broken latch switch
FIX: Recommended to replace latch switch

CODE: F0
PROBLEM: Safety signal lost
FIX: Recommended to replace adapter board

CODE: F1
PROBLEM: Watchdog circuit
FIX: Recommended to replace Electronic Range Control

CODE: F2
PROBLEM: Oven overheating
FIX: Recommended to replace oven temperature sensor

CODE: F3 F4
PROBLEM: Temperature sensor shorten or open
FIX: Recommended to replace oven temperature sensor

CODE: F7
PROBLEM: Touch panel shortened
FIX: Recommended to replace glass panel

CODE: F9
PROBLEM: Door motorized
FIX: Inspect latch switch

CODE: FF
PROBLEM: Lock error
FIX: Inspect switch and motor

Amana washer error codes

CODE: LOC or LC
PROBLEM: Control Lock has been activated
FIX: Touch the Control Lock button, or (on older models) determine which button activates control lock from your Owner’s Manual. Some models require you to press and hold the button.

CODE: dET
PROBLEM: Detergent cartridge not detected in the dispenser.
FIX: This is on select models. If you are using single-load doses of detergent, ignore this message. Ensure the dispenser cartridge is inserted correctly and the dispenser drawer is shut completely.

CODE: Int
PROBLEM: The cycle was paused or canceled.
FIX: The washer may take 20 to 30 minutes to stop spinning and drain, and will display this error code during that time. To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute.

CODE: rL or F34
PROBLEM: Items were detected in the washer during the Clean Washer cycle.
FIX: Remove items from the drum and restart the Clean Washer cycle.

CODE: Sud or Sd
PROBLEM: There are too many suds in the washing machine.
FIX: The washer will not be able to spin out water with the excess suds. When “Sud” or “Sd” is displayed, the washer automatically extends the rinse time to remove the excess suds. During this time, the washer pauses the tumbling and adds water for additional rinsing. This pause allows the bubbles in the suds to break. This pause and rinsing are necessary and may occur several times to eliminate the suds. Make sure you are using HE or High Efficiency detergent. Find more information on HE Detergent use in your Washer.

CODE: F5 E2
PROBLEM: The door is not locking properly.
FIX: Check that there are no items blocking the door and it is closing completely. Press the Pause or Cancel button twice and the Power button once to clear the code.

CODE: F7 E1
PROBLEM: Indicates a motor speed sensing error,
FIX: The motor can not achieve the correct speed for the cycle selection. Check that all the shipping bolts have been removed, and the washer has not been overloaded. Press the Pause or Cancel button twice and the Power button once to clear the code.

CODE: F8 E1 or LO FL
PROBLEM: The washer is sensing a low flow of water.
FIX: Check that rhe household water supply is turned on and both the cold and the hot water faucets or valves are fully open, the water inlet hoses are not kinked (learn more about How to check your Fill Hoses if your Washer is not Filling), and there are no anti-flood hoses and controls in the water line connected to the washer (learn more about Should I use Flood Safe Devices on my Front Load Washer. Press the Pause or Cancel button twice and the Power button once to clear the code.

CODE: F8 E2
PROBLEM: Indicates there is a problem with the Dispenser System
FIX: This is on select models. Verify detergent drawer or detergent cartridge is not clogged with detergent.

CODE: F9 E1
PROBLEM: Indicates that drain times are longer than expected, typically over eight (8) minutes.
FIX: Make sure the drain hose is not kinked or clogged. Use the U-shaped drain hose form on the drain hose. The standpipe (drainpipe) height requirements are 96″ (244 cm) maximum and 39″ (99 cm) minimum.

CODE: Other F# E# code
PROBLEM: Indicates other error
FIX: Unplug the washer or disconnect the power for one minute and reconnect it again. Reselect the cycle and press Start.

Amana microwave error codes

CODE: Err1
PROBLEM: Failed H.V. board.
FIX: Replace H.V. board.

CODE: Err2
PROBLEM:
Shorted Touch Panel
Failed H.V. Board
Shorted Display Board
Shorted Cable HV to Display Board
FIX:
Replace Touch Panel.
Replace H.V. board.
Replace Display Board.
Replace Cable.

CODE: Err3
PROBLEM: Failed H.V. board.
FIX: Replace H.V. board.

CODE: Err4
PROBLEM: Failed H.V. board.
FIX: Replace H.V. board.

CODE: Err5
PROBLEM: Shorted Touch Panel
FIX:
1. Disconnect oven from power supply.
2. Disconnect side touch panel connector from display board (J5).
3. Reconnect oven to power supply.
4. If “Err5” reappears after 30 seconds, replace top touch panel.
5. If “Err5” does not reappear after 30 seconds, replace side touch panel.

CODE: Err6
PROBLEM: Failed H.V. board.
FIX: Replace H.V. board.

CODE: HOT
FIX:
• Open TCO (magnetron).
• Blower motor inoperative.
• Restricted air filter.
• High ambient temperature.
• Oven operated empty or with light loads.
• Broken or loose wire.
• H.V. board inoperative.

CODE: Door
PROBLEM: Door Interlock Primary Switch
FIX:
• Verify latch mechanism moves freely on door.
• Verify J1 connector on display board is properly seated.
• Test interlock switch assembly and perform door adjustment ifnecessary.
• Replace interlock switch assembly.

Amana dishwasher error codes

RESET AMANA DISHWASHER LIGHTS BLINKING:
The lights that are blinking or flashing on your Amana dishwasher tell you that your dishwasher may need a reset or may mean a part needs replaced, repaired, or checked and cleaned.
NOTE: Always unplug the dishwasher from power before troubleshooting.

If your Amana dishwasher has lights blinking, your dishwasher can be reset by simply unplugging the dishwasher for 5 minutes. By removing power to the Amana dishwasher, you may be able to reset the control board and this can clear the lights blinking.

Try this to reset your Amana dishwasher before taking the dishwasher apart and checking parts:

  • Unplug your Amana dishwasher
  • Wait for 5 minutes
  • Plug the dishwasher back into power
  • Do a test wash and see if the dishwasher has reset and the lights blinking are now clear.

The lights on your Amana dishwasher may also blink and flash to tell you a part in the dishwasher is faulty.

Amana dryer error codes

CODE: AF or  F4E3
FIX: Restricted air flow. It indicates that the lint screen or vent is clogged; the vent is crushed, kinked or has too many turns. The dryer will continue to run when the is error is present. Touch any key to clear the code from the display and return to the estimated time remaining. You may also receive an F4 E3 for this issue.

CODE: F# E#
FIX: If a code beginning with an “F” appears in the display, alternating between F# and E#, the dryer control has detected a problem that requires service.

CODE: L2
FIX: Low or no line voltage. There may be a problem with your home power supply, keeping the dryer’s heater from turning on. The dryer will continue to run when this diagnostic code is present. Touch any pad to clear the code from the display and return to the estimated time remaining. NOTE: This error will only show during the initial installation.

CODE: PF
FIX: Power failure. It indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.

Amana refrigerator error codes

CODE: PO
PROBLEM: Power Outage: The Power Outage indicator lets you know if the power supply to the refrigerator has been off and the freezer temperature has risen to 18 Fahrenheit or higher. The control panel temperature display will read “PO,” and an alert tone will sound three times. “Confirm” will blink until you acknowledge the power outage by pressing MEASURED FILL under “Confirm.” Once the power outage has been confirmed, the “PO” will disappear, and the display will return to the Home screen.

CODE: FLASHING “F”
PROBLEM: If the letter “F” is flashing on the display the refrigerator, try resetting the refrigerator as instructed below.
FIX:
– Power unit down by turning off the circuit breaker(s) or unplugging the product for one minute.
– Power unit up by turning on the circuit breaker(s) or plugging the product back in.
– Ensure the cooling function is turned on.
– Monitor the refrigerator for one minute to ensure the error code does not display again.

CODE: Air Filter Indicator Light
PROBLEM: After replacing the air filter the air filter status will need to be reset. Directions for resetting the status will vary by model number, we recommend referencing the Owner’s Manual for specific models instructions.
FIX:
TO RESET THE AIR FILTER:
Press and hold the AIR FILTER button for three seconds.
The filter icons will turn off. When the system is reset, the air filter icon will return to its BLUE color and the words “Replace Filter” will disappear from the control panel.

AIR FILTER STATUS LIGHTS:
The below are the different stages you will see on the air filter display
GOOD – The air filter icon on the control panel lights up in BLUE.

ORDER a replacement – The air filter icon on the control panel lights up in YELLOW.
REPLACE air filter – The air filter icon on the control panel lights up in RED and “Replace Filter” will appear.
EXPIRED – The air filter icon lights up in RED and “Replace Filter” flashes on the control panel.
NOTE: At any filter status, pressing and holding the AIR FILTER button for 3 seconds will reset the air filter status to Good and the air filter icon will turn off.

CODE: H2O Light
PROBLEM:
DOES THE WATER FILTER NEED TO BE REPLACED?
The filter status light will help you know when to change your water filter. It is recommended that you replace the filter when the status light changes to red or water flow to your water dispenser or ice s noticeably. The water should be replaced at least 6 months depending on your water quality and usage.
FIX:
HOW TO RESET YOUR FILTER STATUS?
Resetting the Filter Status After changing the filter:
– Pressing and hold LIGHT and ICE TYPE button for three seconds.
– The status light will turn off when the system is reset.

CODE: Door Alarm
PROBLEM:
WAS THE DOOR LEFT OPEN?
The Door Ajar Alarm feature sounds an alarm when the refrigerator door(s) or freezer drawer is left open for 2-5 minutes, depending on the model, and cooling is turned on. The alarm will repeat every 2 minutes. Close all doors to turn off and reset the alarm.
FIX:
ARE THE DOORS COMPLETELY CLOSED?
Ensure the doors are closing correctly.  If the doors are not making contact with the door switch the door ajar symbol will appear on the display.  Check to make sure bins, shelves or food packages are not preventing the door(s) from closing correctly.
IS THE REFRIGERATOR LEVEL?
Check to make sure the refrigerator is leveled front to back and side to side to ensure the door switch is making proper contact. Check to make sure the floor under the refrigerator is also level. If the floor is not level shims may need to be used.

CODE: Cooling Off Indicator Light
PROBLEM: Your refrigerator and freezer will not cool when cooling is turned off. When cooling is off, “COOLING OFF” will appear on the display screen.  To turn the cooling function back on will vary by model and refrigerator type, below is a common method, but please see your Owner’s Manual for specific information on your model.
FIX:
To turn cooling off:
– Press and hold the LOCK and MEASURED FILL buttons at the same time for 3 seconds. IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time. When cooling is off, “COOLING OFF” will appear on the display screen.
– Press and hold LOCK and MEASURED FILL for 3 seconds again to turn cooling back on.

IS THE COOLING FUNCTION TURNED ON?
If the Refrigerator is not cooling properly, check to make sure the Refrigerator is turned on. Some Refrigerators need to be manually turned back on after a power outage or power surge. The Refrigerator could also accidentally be turned off during routine cleaning.

If you need qualified help.

Whether you dealing with some malfunction, problem you never had before with your appliance, or you are planning to maintenance or repair your technic our technicians can help by providing same day service..