My Appliance Repair Houston Your Appliance Repair Specialist
Send

Same Day Appliance Repair In Houston (281) 764-6293

info@myappliancerepairhouston.com

14 July 2017

Comments:

0
 July 14, 2017
 0
Category: Blog

Thermador Oven/Range/Stove Fault Codes (Starting with F)

Note: Depending upon the brand of appliance, there can be many different names for the ‘clock’ component. Electronic Range Control, ERC, Electronic Oven Control, EOC, control board, and clock all refer to the same part.

Error code
Error description
Check/Repair
F0
Oven Control Failure
Replace control board (clock).
F1
Oven Control Failure
Replace control board (clock).
F2
Oven Temperature Too Hot
Replace relay board if faulty. Check and replace oven temperature sensor (RTD). If error persists, replace control board (clock).
F3
Open Oven Temperature Sensor (RTD)
Check the connection between the oven control and oven sensor, as well as the sensor harness. If wiring is ok, replace oven temperature sensor (RTD).
F4
Shorted Oven Temperature Sensor (RTD)
Check the connection between the oven control and oven sensor, as well as the sensor harness. If wiring is ok, replace oven temperature sensor (RTD).
F7
Function Key Stuck
Check all keys on touch pad (keypad). Replace control board (clock).
F8
Internal Logic Failure
Check the connection between the oven control and oven sensor, as well as the sensor harness. If wiring is ok, replace oven temperature sensor (RTD) and control board (clock).
F9
Internal Logic Failure
Check door latch and switches and replace if defective. Replace control board (clock) if everything else is ok.
Fd
Bake And Broil Relay Drives Act Simultaneously
Check relay board and control board (clock). Replace if damaged.

Thermador Oven/Range/Stove Fault Codes (Starting with E)

Note: Depending upon the brand of appliance, there can be many different names for the ‘clock’ component. Electronic Range Control, ERC, Electronic Oven Control, EOC, control board, and clock all refer to the same part.

Error code
Error description
Check/Repair
E1
Control Board Failure
Replace control board (clock).
E2
Oven Temperature Sensor (RTD) Fault
Check oven temperature sensor and replace if faulty. If sensor is ok, replace control board (clock).
E3
Open Oven Temperature Sensor (RTD)
Replace oven temperature sensor (RTD).
E4
Shorted Oven Temperature Sensor (RTD)
Replace oven temperature sensor (RTD).
E5
Control Board Failure
Replace control board (clock).
E6
Control Board Failure
Replace control board (clock).
E7
Control Board Failure
Replace control board (clock).
E8
Control Board Failure
Replace control board (clock).
E9
Door Latch Switch Problem
Check door latch switches and wiring. Replace if faulty.
E10
Control Board Failure
Replace control board (clock).
E11
Door Latch Switch Problem
Check door latch switches and wiring. Replace if faulty.
E12
Door Latch Switch Problem
Check door latch switches and wiring. Replace if faulty.
E13
Latch Motor/Control Board Failure
For CT models, check power to latch motor. For CMT models, the control board has not converted.
E14
Door Latch Switch Problem
Check door latch switches and wiring. Replace if faulty.
E15
Control Board Failure
Replace control board (clock).